NEW PRODUCTS - JCR 718 4RS CARBON FIBRE WING END PLATES & WING UPRIGHT OPTIONS

We're very excited to launch a range of new JCR Aero products suitable for the stunning 718 GT4 RS

First up, a fantastic Aesthetic modification with some added weight savings.

JCR 718 GT4 RS - CARBON FIBRE WING END PLATES

  

There's several small details which feature in the design of the JCR Carbon Fibre End Plates which, although small in isolation, add up for an impressive overall result.

From the 100% Prepreg Carbon Fibre Construction in matching OEM cloth to the optimised aero profile and weight savings. This level of attention to detail is something which we carry across our whole product range.

As with all JCR products our Carbon Fibre Wing End Plates have been rigorously tested on the Road and Track under the most extreme conditions over tens of thousands of miles.

The JCR Carbon Fibre End Plates reduce weight by 0.50kg vs OEM 718 GT4 RS End Plates, representing a huge 63% reduction with the JCR Carbon Fibre End Plates weighting in at a mere 150grammes a piece! Performance advantage with zero weight penalty.

Key Features

• 100% Direct Replacement
• -0.50kg Weight Reduction vs OEM End Plates
• 100% Prepreg Carbon Fibre Construction
• Choice of Optional Highlight Colours
• OEM Fixing Tape Supplied

Product Notes

• This product is ONLY compatible with the OEM 718 GT4 RS Rear Wing

Applications

• 718 GT4 RS

You can check out our 718 GT4 RS - Carbon Fibre End Plates in more detail on the JCR Website product page HERE

Next up our range of Wing Upright solutions suitable for the 718 GT4 RS.

We have produced two variations of this product, subtly different in their designs with the major difference being the material and production techniques.

Both versions of the JCR 718 GT4 RS Wing Uprights are designed to optimise performance on Track, look great and also reduce weight.

The JCR Wing Uprights are a 100% direct replacement part and reposition the OEM 718 GT4 RS Rear Wing into a more optimised position (up and back) versus the factory position featured on the 718 GT4 RS.

The revised wing position our uprights offer improves efficiency by increasing the effectiveness of the factory rear wing (repositioning up and back) delivering a more performance orientated aero balance along with an overall lower AOA (angle of attack) resulting in less drag.

Another touch added for reduced drag was to remove material in the front leading edge of the wing upright. Although a small detail, every little helps.

We also took the opportunity to alter the base angle of attack that the wing sits in which allows for a more aggressive range of adjustment. This in turn opens up the opportunity to add more downforce to the front end with use of our soon to be released front Aero options.

The JCR Wing Uprights are a 100% direct replacement part using the OEM mounting points and are compatible with the 718 GT4 RS and re use the factory seals and fixings.

We even go so far as to include bespoke Billet Titanium Hardware with every set of our Wing Uprights, available in Raw or Black finish. Every little helps when it comes to weight savings.

Our Billet Aluminium version is available in Silver or Black anodised finish for a perfect OEM+ type appearance.

JCR 718 GT4 RS - BILLET ALUMINIUM WING UPRIGHTS (SILVER)

JCR 718 GT4 RS - BILLET ALUMINIUM WING UPRIGHTS (BLACK)

Key Features

• 100% 6082-T6 Aluminium Construction
• Direct Replacement
• -0.44kg Weight Reduction vs OEM Wing Uprights
• Improved Rear Stability
• Larger Range of Adjustment
• Choice of Raw or Black Anodised Finish
• Titanium Fixings (Silver or Black)

Product Notes

• This product is ONLY compatible with the OEM 718 GT4 RS Rear Wing

Applications

• 718 GT4 RS

You can check out both versions of our 718 GT4 RS - BILLET ALUMINIUM WING UPRIGHTS in more detail on the JCR Website product page HERE

Our Titanium 3D Printed Wing Uprights are available in either a Raw Printed Titanium finish or Black painted for a perfect OEM+ type appearance.

JCR 718 GT4 RS - TITANIUM 3D PRINTED WING UPRIGHTS (RAW)

JCR 718 GT4 RS - TITANIUM 3D PRINTED WING UPRIGHTS (BLACK)

 Key Features

• 100% 3D Printed Titanium Hollow Construction
• Direct Replacement
• -0.72kg Weight Reduction vs OEM Wing Uprights
• Improved Rear Stability
• Larger Range of Adjustment
• Choice of Raw or Black Finish
• Titanium Fixings (Silver or Black)

Product Notes

• This product is ONLY compatible with the OEM 718 GT4 RS Rear Wing

Applications

• 718 GT4 RS

You can check out both versions of our 718 GT4 RS - 3D PRINTED TITANIUM WING UPRIGHTS in more detail on the JCR Website product page HERE

Please feel free to contact us with any questions relating to this new product release using the following link HERE

JC